Visus MPEG-4 DVR Uživatelský manuál Strana 69

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 80
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 68
User’s Manual
www.dynacolor.com.tw
All rights reserved
69
5.6.4.2 Video Loss Detect >
This item allows user to enable / disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, <OFF> to disable. The
default setting is <ON>.
5.6.4.3 Motion Detect >
Use to enable or disable the motion detection function of the DynaGuard
TM
100 MPEG-4 DVR. By default, the value is <OFF>.
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
5.6.4.4 Detection Configuration >
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings. Select a
channel for setting the parameters, move the cursor to <Detection Config>,
and press ENTER. The Detection Configuration menu displays as follows.
Detection Config
1. Detected Area Setup
2. Sensitivity
3. Area Threshold
75%
60%
----- Detected Area Percentage -----
40%
Zobrazit stránku 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Komentáře k této Příručce

Žádné komentáře